Why is Cold Plasma Clean® technology a revolutionary advance for hand dryers?

The eXtremeAir® CPC kills germs like; E.coli, Salmonella, Influenza A, Staph, C.diff and MRSA. No other hand dryer has this patented technology.

Will Cold Plasma Clean feel cold on my hands?

No! You will experience comfortable, warm air.

How does American Dryer’s patented Cold Plasma Clean compare with “clean” technologies found in other hand dryers?

The best that competitors can do at present is attempt to clean the air coming into their dryers through their inlets by using HEPA filters. HEPA filters do not kill germs, only trap them. What’s more, once air leaves our competitors’ dryers, it mixes immediately with unclean ambient air, all of which is used to dry your hands. This is far from ideal.

HEPA filters also create the need for ongoing dryer maintenance, so they don’t clog and potentially cause dryer failure.

Will other companies’ dryers offer Cold Plasma Clean?

No! American Dryer’s patented technology means that our company is the only one that offers Cold Plasma Clean technology in hand dryers.

How does the eXtremeAir hand dryer work?

Traditional hand dryers use a slower moving large volume of warm air to evaporate moisture from one’s hands. The low velocity of the air is slow to penetrate the surface tension of the water, resulting in long drying times. The eXtremeAir high speed hand dryer uses a high velocity jet of warm air to quickly break up this surface tension for quick removal and evaporation. The result is a drying time of 10 to 15 seconds.

Why is the eXtremeAir energy efficient?

It dries hands three times faster while using 1/3 of the electricity of traditional hand dryers. When in operation, the eXtremeAir CPC uses only 1500 watts of electrical power versus 2300 watts of a typical hand dryer. This adds up to an 80% reduction in energy.

What’s the difference between power and energy?

It’s really simple:
Energy = Power x Time
Power is measured in Kilowatts (KW)
Time is measured in Hours (h)
Therefore, Energy is measured in KW x h or KWh

Energy is purchased from your electrical utility in KWh. Therefore, to reduce energy consumption (and cost), use devices that use less power (KW) for less time (h). Note: the metric unit for energy is the KiloJoule (KJ) and this is commonly used in environmental studies.

How much does it cost to operate a hand dryer?

You can calculate your operating costs by clicking here. Based on a cost of 0.10 € per KWh for electricity, the eXtremeAir CPC costs about 0.54 € per 1,000 hand dryings.

How do you install a hand dryer?

Hand dryers are installed by your local electrician. The electrician connects the dryer to a dedicated line and fastens it to the wall.

How many dryers do I need?

For average traffic washrooms, we recommend one dryer for each wash basin. For heavy traffic, use two dryers per wash basin. Use 4 dryers for each 54” wash fountain.

How loud is a hand dryer?

Our dryers are among the quietest in the industry. The eXtremeAir Series features adjustable sound and speed. Click here to download more information.

How did the eXtremeAir get Greenspec® listed?

GreenSpec is an unbiased list of the most environmentally friendly products published by the editors of Environmental Building News. BuildingGreen does not charge for listings or for the review process, nor do they accept advertising. GreenSpec’s objective is to list only the top 5-10% of environmentally preferable products. The eXtremeAir hand dryer was approved for listing in the GreenSpec directory after reviewing our Life Cycle Assessment (LCA) data, along with energy and raw material usage. The eXtremeAir was GreenSpec approved as equipment that conserves energy, manages loads and reduces material use. For more information visit www.buildinggreen.com.

What are LEED® credits and how does the eXtremeAir help your green building project?

LEED is the U.S. Green Building Council’s Green Building Rating System. It stands for Leadership in Energy and Environmental Design. American Dryer is a member of the U.S. Green Building Council. Companies can obtain LEED Credits toward their green building project by specifying green building materials such as the eXtremeAir hand dryer. The eXtremeAir helps facilities qualify for LEED-NC, LEED-EB and LEED-CI credits in several categories:

EA Credit 1 Optimizing Energy Performance (Mandatory)
MR Credit 6 Solid Waste Management – Waste Stream Audit
IEQ Credit 3.1 Green Cleaning – High Performance Cleaning Program
IO Credit 1 Innovation in Operations
IO Credit 3 Documenting Sustainable Building Cost Impacts

For more information visit www.usgbc.org.